No products
T-Slot Sensor Kits
New product
Macron T-Slot Sensor Kits install easily in all Macron actuators, belt drives, screw actuators, and MacFRAME aluminum beams.
Ships in two weeks upon receipt of order
Data sheet
| Input Voltage | 10–30 VDC Voltage |
| Operating Temperature | -40°C to 105°C |
| Sensor Type | Inductive |
| Sensor Size | Fits all 8mm wide T-Slots |
| Voltage Drop Across Conducting Sensor | 1.8 V at 100 mA |
| Number of Conductors (AWG) | 3×26 AWG |
| Contact Carrier Material / Color | Nylon or PUR / Black |
| Contact Material / Plating | Brass / Gold |
| Outer Cable Jacket Material / Color | PVC / Grey |
| Conductor Insulation Material | PVC |
| Coupling Nut Material / Plating | Brass / Nickel |
More info
Features
Macron T-Slot Sensor Kits install easily in all Macron actuators, belt drives, screw actuators, and MacFRAME aluminum beams. Using T-nut capture and adjustability our inductive proximity sensors fit perfectly into the actuator beam T-slot and provide a low profile mounting. The cables can be routed through the T-slot producing a clean system.
T-slot sensors are 24VDC and available in PNP and NPN output transistor logic with NO (normally open) or NC (normally closed) configuration. Sensors and mating cordsets meet NEMA 1, 3, 4, 6P and IEC IP67 ratings. Macron T-slot Sensors can provide users with limit, position or output signaling back to a control system.
Each T-Slot Sensor Kit Includes:
- Sensor
- Cord Set
- T-Nut w/Set Screws (Long and Short)
- Mounting Screw (M3x10 FHCS)
- Tech Data Sheet and Installation Guide
- Cord-Set Extension (if specified)
