New product
NEMA 23 (57mm) 0.4kW Low Inertia AC Servo Motor with Encoder, D-Cut Shaft.
0 Item Items
Ships in 1-2 days upon ordering.
Warning: Last items in stock!
Availability date:
Rated Output | 0.4kW |
Rated Voltage | 60V |
Applicable Servo Drive | DYN2 / DYN4 |
Rated Torque | 1.27Nm |
Instantaneous Max Torque | 3.82Nm |
Rated Current | 8.4A | 2.8A |
Max. Current | 21.0A | 8.5A |
Rated Speed | 3000 RPM |
Max. Speed | 5000 RPM |
Rotor Inertia | 0.426kg.cm² |
Torque Coefficient | 0.181Nm/A | 0.455Nm/A |
Encoder | 16-bit Absolute [ABS-16-01] |
Weight | 1.65kg | 3.64lbs |
Time Rating | Continuous |
Thermal Class | F |
Excitation Method | Permanent Magnet |
Insulation Resistance | DC500V, Over 20MΩ |
Noise Rating | ≤ 60 dB |
Ambient Temperature | 0 ~ 40ºC |
Storage Temperature | -20 ~ 50ºC |
Ambient Humidity | 20 ~ 80%, No Condensation |
Enclosure | IP65 |
Shock | 98m/s2 Max. (10G) |
0.40kW NEMA 23 motor. Standard NEMA23 mount with 1/4" D-Cut Shaft with two flat seats.
Note: This motor is only available as a 60V voltage class for use with DYN2 servo drive. Use with DYN4 servo drive is possible with 110/120VAC input.
Please contact us for non-standard inventory options, including oil seal, or custom options.